Dyno results and tuning discussion
Figured I can make a data list of who's done what instead of trying to go through every thread on here. No real set goal for this, but just to make a quick search database. Post up yours if you want to. Otherwise PM me. I'll move it to the main post so it will become part of a "database page"...
This is a list of dyno locations in the Midwest. Please post up any dyno locations you know of. Posts should be in the following format. PLEASE BE COMPLETE. STREET ADDRESS SHOULD BE COMPLETE WITH CITY STATE ZIP. MAP LINK SHOULD TAKE YOU TO A MAP. THIS CAN BE THE SHOP'S SITE OR A GOOGLE MAP,...
Huge thanks to Shane up at DB Performance for a great tune and late night up at the shop. After a horrible ignition set up for 5+ years I finally steped up my game thanks to LJ I got a M&W Pro10 with a Crane coil, and there was no more miss fire since!!! Shane and I decided to try and get a time...
Details on YouTube. The owner just sent me this video http://www.youtube.com/watch?v=zaaIi49xGXk&feature=youtube_gdata
http://www.adrenalinrushllc.com/adpics/forum/never_hurt_sm.jpg http://www.adrenalinrushllc.com/adpics/forum/adrenalin_rush_aug_2010_1_sm.jpg http://www.adrenalinrushllc.com/adpics/forum/Adrenalin_kiss_this_sm.jpg Ok, here's the scoop. Remember that the dyno is the Mustang 500AWD at RS...
Decided to see what the 09 wrx could do on the dyno at MAP. Did a baseline run to see what it did out of the box and then Jordan worked his magic and ended up with this. We actually hit 319tq but that plot did not make it on this chart:confused: Really happy with the results, more than I thought it...
I don't give a fuck about your Honda, so don't tell me about it. Thanks for the pulls Jordan. http://www.youtube.com/watch?v=QdzmR-5hgiI I have future plans to tune and make about 140whp/14~wtq.
I threw my car on the dyno for the crowd to see today. Too bad i couldn't get a cooler day but i wanted to see my numbers.... I got laughed at for putting it up there, but i shut a lot of people up after the pulls. For a full warrantied car, i think its pretty damn good. 2.0 LNF Direct Injected...
http://www.maperformance.com/marketing/evo155.jpg After three separate 1-2 hour dyno sessions (customer cars come first and late night tuning is not looked upon kindly around here) we have reached a power level that we feel will be adequate as we continue our quest for an 8 second pass in our...
Well i just dynoed my car at MAP and it made 476rwhp and 425tq at 22psi. next goal is to get bigger injectors and run on e85 to make over 500! Mods Swapped 1JZ motor with a single turbo set up pretty much stock with some minor things....
My friend has an 05 Cobalt LS (2.2 ECOTEC) with the Garrett turbocharger kit and an AEM F/IC system. He has low compression forged pistons (8.5:1) and Eagle rods, and wants to get it tuned for higher boost. Which shops in the cities have more experience with the ECOTEC 2.2 and the AEM F/IC?
Hey guys I haven't been on here forever. But I just finished doing a turbo install on my civic and chipped the ecu, and have good fuel maps on my computer to put it on, but no EPROM burner! If someone has one and is willing to let me use it I can definitely throw some cash your way. Thanks!
Just bought a 94 del sol with a ls/vtec turbo set up...fully built with a .70 trim turbo but i need to get it tuned. Just wondering where the best place to take it is?
Here is my Supra, just wanted to share... http://www.youtube.com/watch?v=DvB8u1ZLM2M (650 rwhp @24.5 psi) http://www.youtube.com/user/DBPerformanceMN#p/a/u/1/Qv39ty9DlAU (Couldn't get the car to run at a consistent boost, weak wg spring) Thanks Shane for the tune Thanks to Andy for the...
Is it just me or is it damn near impossible to find any good tuning parts or information for Nissan Sentras post-2006? It's like the new body style and better stock tuning in the '07 and later Sentra SE-R V-Spec caused all of the parts manufacturers to run away. I just bought myself one of...
first I wanna say thanks Jordan at MAP for the tune! I made 289 whp and 269 torque on about 14 psi. I wanted to raise the boost more but the 5.8 pound spring in my wastegate was not having any of that haha. My goal was 300 or more but I'm happy with the numbers so far given the boost level. ...
I have a 1997 Mitsubishi Eclipse Spyder GST Convertible that I have been working on for about 3 years. I have come along way since I bought it from my buddy as alll stock with a blown motor. One of the main things that I did to it was convert it to AWD. Here is a list of mods that are done to...
Going to have my cars mods finished up pretty quick here and would like to get it dyno tuned. Just wondering who will do a E46. Pretty basic, headers, exhaust *no cats*, intake, speed limiter removed, rev-limiter increase. It already has been sharked but I think it's worth it to me to get it...
Just wondering if anyone in MN can tune Unichip? thank you
In my ongoing search for the right car, I have decided to check out other cars, other than Subaru. My question is...Is there any shops in the Minneapolis area that are good with something like an Audi A3. I am just trying to get some research together to see what is the best way to go. Thanks.
base boost was 1 bar last run was 1.65 bar stock fuel with a 14 gph nozzel spraying 100% meth http://i127.photobucket.com/albums/p121/grandporschegt/Red%20Line%20Dyno%200930th07/4307w4287.jpg http://i127.photobucket.com/albums/p121/grandporschegt/Red%20Line%20Dyno%200930th07/6366w5355.jpg and...
Car is an 06 Evo IX RS with 40k on the clock Mods: AEM intake pipe, EPM O2 dump, Buschur full TBE, Buschur lower pipe, Buschur Upper pipe, Buschur Race FMIC, Precision 1000cc injectors, Walbro pump, Fullblown MBC. and last but not least( E freakin 85 ) The rest stock, stock cams, stock intake...
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules